Akkuyu Unit 1 begins cold-and-hot reactor testing

The Turkish Nuclear Regulatory Authority authorized the program on November 15; fuel loading and physical startup remain ahead.

Image: Rosatom

Key facts

  • Primary-circuit coolant is to reach 285°C and 16.5 MPa
  • Fuel-assembly simulators, not nuclear fuel, are in the reactor core during testing
  • An equipment review and regulatory authorization are required before startup operations

Rosatom said on November 18 that cold-and-hot testing of the reactor installation had begun at Akkuyu Unit 1. The Turkish Nuclear Regulatory Authority authorized the test program on November 15. The tests will put equipment in the primary and secondary circuits through operating modes before nuclear fuel is loaded and the unit proceeds to physical startup.

The program gradually raises the temperature and pressure of the primary-circuit coolant, demineralized water, to 285°C and 16.5 MPa. Rosatom said that pressure is comparable to the pressure on a body submerged 1,650 meters underwater. The tests cover equipment and piping strength, vibration, electrical systems, reactor control and protection, and safety systems; the core contains fuel-assembly simulators rather than nuclear fuel.

After testing, an inspection of main and auxiliary equipment is planned to confirm compliance with design requirements and readiness for physical startup. After the review, the Turkish regulator will authorize startup operations; uranium fuel assemblies will then be loaded for physical startup.

1 source

More on Rosatom · Akkuyu

Report an error