Watts Bar licensee retracts Unit 2 pressure-boundary degradation report
The leak came from a plug above penetration 22; the licensee said American Society of Mechanical Engineers Section XI acceptance criteria were met.

Key facts
- Leakage traced to a plug above control rod drive mechanism penetration 22
- Leak traveled along the drive mechanism housing and collected around penetration 22
- Unit 2 was in refueling mode at zero power
Watts Bar’s licensee retracted its November 13 report of a degraded pressure boundary at Unit 2, the NRC’s event notification said on November 15. The initial report was based on boric acid found around penetration 22 during reactor pressure vessel inspections.
The licensee later traced the leak to a control rod drive mechanism plug above the penetration. Leakage ran along the housing and collected around penetration 22; the licensee said the pressure-boundary acceptance criteria in American Society of Mechanical Engineers Section XI were met.
More on US Nuclear Regulatory Commission